Baumit

Ideas with a future.

Product Information

Baumit StarTrack Red

Baumit StarTrack Red

(Baumit StarTrack Red allow a good adhesion without additional fixing for Baumit Open - KlimaFaçade and for Baumit ETICS)

Additional mechanical fixing alternative to standard dowelling, in the case of existing old plaster. Existing old plaster up to a max. total thickness of 40 mm can be bridged over. Drill bit Ø: 8 mm.

More information:


PRODUCT HIGHLIGHTS

  • Façade without thermal bridges

  • No "surprises" when drilling

  • Perfect anchoring

Your questions

Last question:


Expert answer:

Ask a question See more

HELPFUL TIPS

Guide consumption: 6 StarTrack units per square meter. Actual consumption is dependent on the specific insulated wall Uneven areas in the subsurface, with gaps and holes, increase the number of anchors used. The maximum distance between anchors in pattern 4 applies. Data: Anchoring depth in load-bearing substrate: ≥ 40 mm Shaft length: 88 mm Borehole depth: at least 95 mm Rate of product consumption: approx. 6 StarTrack Red fittings per m2

StarTrack can only be used for EPS insulating panels, they cannot be used if mineral wool has been selected as the thermal insulation.

The thicker the insulating material, the more expensive and the more difficult it is to use traditional dowels. StarTrack (adhesive anchors) is universally applicable - regardless of the thickness of the insulating material, StarTrack is applied in the same way.