Baumit

Ideas with a future.

Product Information

Baumit Baumacol Basic

Baumit Baumacol Basic

(Tile adhesive)

Tile adhesives for thin-bed laying. Complies with the quality requirements of DIN EN 12004 Class C 1. mortar for ceramic tiles and panels on walls and floors for indoor and outdoor use. For laying cer

More information:


PRODUCT HIGHLIGHTS

  • Cost-effective

    For binding of common ceramic tiles and floor tiling.

  • For all ceramic surfaces

    Normal hardening cement mortar, easily applied.

  • Suitable for outdoor and indoor use

    Suitable mainly for the interiors on substrates such as concrete, porous concrete, lime cement mortars etc.

Your questions

Last question:


Expert answer:

Ask a question See more

HELPFUL TIPS

Use a suitable bonding primer prior to bonding, Baumit Grund for absorbent substrates or Baumit SuperGrund for non-absorbent substrates.

Apply a thin contact layer of adhesive on the substrate. Then, spread the applied layer by a suitable toothed smoother under 45 – 60°. Imprint slightly the facing elements to the adhesive mortar. Position of facing elements can be corrected within 5 minutes.

Tiling with Baumacol:  Ceramic surfaces should only be layed out dry. Depending on the sort of tile use the suitable Baumacol tile adhesive.Clean the surface properly.

Step 1: Tiling with Baumacol: Ceramic surfaces should only be layed out dry. Depending on the sort of tile use the suitable Baumacol tile adhesive.Clean the surface properly.

    • Tiling with Baumacol:  Ceramic surfaces should only be layed out dry. Depending on the sort of tile use the suitable Baumacol tile adhesive.Clean the surface properly.

      Step 1: Tiling with Baumacol: Ceramic surfaces should only be layed out dry. Depending on the sort of tile use the suitable Baumacol tile adhesive.Clean the surface properly.

    • Use Baumit Grund for a better bondage and for preparing non-absorbent substrates.

      Step 2: Use Baumit Grund for a better bondage and for preparing non-absorbent substrates.

    • Baumit Nivello 10 spreads easily on uneven floors. Coat Baumit Nivello 10 with a scraper equably.

      Step 3: Baumit Nivello 10 spreads easily on uneven floors. Coat Baumit Nivello 10 with a scraper equably.

    • Use Baumacol Strap for a durable and flexible sealing in corners.

      Step 4: Use Baumacol Strap for a durable and flexible sealing in corners.

    • Then apply Baumacol Proof for a safe sealing against splash waters. For outside areas use Baumacol Protect. Apply with a 6 mm scraper.

      Step 5: Then apply Baumacol Proof for a safe sealing against splash waters. For outside areas use Baumacol Protect. Apply with a 6 mm scraper.

    • Preparation of the mortar bedding. The size of the scraper depends on the backside of the tiles.

      Step 6: Preparation of the mortar bedding. The size of the scraper depends on the backside of the tiles.

    • Lay out the tiles in the prepared mortar bedding.

      Step 7: Lay out the tiles in the prepared mortar bedding.

    • Apply the grout mortar diagonally with a rubber scraper.

      Step 8: Apply the grout mortar diagonally with a rubber scraper.

    • Use suitable color of Baumit Silicon to seal the joints flexibly.

      Step 9: Use suitable color of Baumit Silicon to seal the joints flexibly.

    • Optimal result with Baumit Baumacol is guaranteed.

      Step 10: Optimal result with Baumit Baumacol is guaranteed.